In parts of the world that experience winter, such as the U.S., a reliable heat source such as a furnace is a necessity, especially when the weather tends to be harsh or cold. Of course, you won’t want your furnace to break down in the middle of that time, so regular and proper cleaning and maintenance are in order. Aside from calling a furnace service from HVAC experts in Salt Lake City such as All Hours Plumbing and HVAC to perform regular checks on it, you can also help by cleaning some parts of it yourself. You don’t even have to do anything special as you can simply follow these pointers:
Without this part, your machine won’t work, so you need to pay attention to how you maintain it. The tools that you’ll need for cleaning the motor are a brush or a dry piece of cloth as well as a vacuum cleaner. Use either one to wipe off all the dirt and grime that may have accumulated in your unit. After you’re done, you can then use the vacuum cleaner to thoroughly remove the impurities on the areas that are well beyond your reach. Just remember to be careful not to cause damage to the part, or you’ll have to call a furnace repair service.
Blower and Fan
Get your soap, water, brushes, rags, and other applicable cleaning materials ready before you proceed to this part of the process. After that, you will need to unscrew and take off the front panel of the furnace and then carefully slide out the blower fan. Use the tools to wash the dirt out of the blades. Use longer and thinner implements such as an old toothbrush for areas that your hand won’t fit into and then dry out the part with an absorbent cloth. Make sure that the parts are completely dry before putting them back in place.
You’ll be taking out more screws when you get to this part, so don’t put your trusty screwdriver away just yet. Once you get the access panel off, you should be able to see the filter right away. Take it out and give it a good brush down. After that, rinse it with water and soap until light passes through freely when you hold it up. This procedure will be even easier if yours is the disposable type because all you have to do is take it out, throw it away, and replace it with another filter.
These simple DIY procedures should be able to help you with maintaining your own furnace. However, if you run into a major problem or are unsure about it, feel free to call professional furnace services. There are a good number of them locally, so you won’t be running out of options anytime soon. Make sure to do maintenance before the winter season comes to ensure that you will have a unit that you can use to warm yourself up. It’s better to spend a little time and money on making sure that your unit will keep working than spend much more on repairs and also suffer from the cold.